Hold the cap and slider down when mixing; do not carry it by the lid.
The loose-fit cap has a complete built-in blind plate, with the front two-finger opening offset from the rear reach-down path; the small-mouth slider loads and pulls out sideways along the two rails. Only the top-down occlusion is verified; oblique views, mixing randomness and real hand comfort still need trying out.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
The loose-fit cap has a complete built-in blind plate, with the front two-finger opening offset from the rear reach-down path; the small-mouth slider loads and pulls out sideways along the two rails. Only the top-down occlusion is verified; oblique views, mixing randomness and real hand comfort still need trying out.
Reference groups used at once
4 round tokens on the same level can be picked one at a time; not proof of maximum capacity or actual shaking
Reference token envelope
Ø26×≤3mm; measure your actual items
Hand entry clear width × depth
60×43.6mm
Clear height above / below the cover plate
45 / 54.2mm
Pick-up path
Drop in at the front → move back over the cover plate → reach down into the rear zone; back out in reverse after grabbing
Full BOM / purchased
1 cup body + 1 one-piece cap + 1 slider; no assembly parts to buy
Upper obstruction boundary
A full cover plate below the hole opening, overlapping 8 mm toward the back; oblique views and real blind draws not verified
Slider and assembly
Side loading / side pulling; 0.4 mm Z capture clearance; the cap lifts off in one piece
Default solid volume
About 348 cm³ (check in your slicer)
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
Default model parts and outer dimensions
Parts
Outer size
File formats
Closed-bottom mixed storage cup
140 × 150 × 105.2 mm
STL · STEP
One-piece blind plate, twin side braces, skirt and cap slide rails
140 × 150 × 57.8 mm
STL · STEP
Small-mouth captive slider and shallow finger recess
66 × 52.6 × 3 mm
STL · STEP
The ZIP contains the complete STL and STEP files, a size list and notes. Version 1.0.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
Closed outer length left to right
120–180 mm
Closed outer depth front to back
125–185 mm
Closed total height including the slide rails
100–155 mm
Interior layout
Reference round token diameter
18–34 mm
Functional configuration
Two-finger entry clear width
52–86 mm
Wrap-around height under the lid
38–60 mm
Rearward occlusion overlap
5–14 mm
Construction details
Cap to rail single-side clearance
0.25–0.7 mm
Floor, lid and rail thickness
2.4–4 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
01
Adjust size
Sign in to open this model in the studio.
02
Preview
Adjusting and 3D preview are free.
03
Check export options
Confirm the files and available download options on the current page.
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
Complete print list: 1 closed-bottom cup body, 1 cap with integrated cover plate/brace/skirt/slide rails and 1 small-mouth slider, 3 printed parts in total. No axles, pins, screws, links, magnets or glue to buy; all manufactured parts download in the same export.
First thread the slider into the double rails from the left or right of the cap, then drop the cap skirt into the cup mouth from the top. 0.4 mm nominal single-side clearance; the slider is stopped from lifting by the rail top edges but can still pull fully out sideways. The cap is a loose fit, not a latch or sealed lid.
Reference round tokens ≤ 26 mm in diameter and ≤ 3 mm thick; with the slider open, two fingers come down through the front opening onto the cover plate, cross back past its end and reach down; after taking items, reverse: rise out of the rear zone, move forward into the opening and withdraw upward.
45 mm of wrap-around height above the cover plate, which extends 8 mm behind the opening; checked against a 42 × max(30, token diameter + 2) × 28 mm reference grip envelope. Only verified that the top-down view hides the bottom; blind draws are not guaranteed for oblique views, lighting or transparent materials.
When loading/cleaning, you can pull off the whole cap first; an undivided loose-parts cavity is kept at the bottom. Hold the cap and slider down when mixing; do not carry it by the lid. Shaking randomness or fair draws are not guaranteed; check that it stays tight and does not spill in transport before use.
Cup body base down, slider flat face down; flip the cap in the slicer so its large rear flat face is on the bed, and check slide rail bridging and cover plate supports. or verify real hand comfort and tolerance fit.
Suggested colors: plum/mint, navy/apricot, grass green/lemon, off-white/clay, berry/haze blue; preview colors are for reference only and do not add models or printed parts.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
Default model parts and outer dimensions
Parts
Outer size
File formats
The ZIP contains the complete STL and STEP files, a size list and notes. Version {{version}}; use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
{{parameter_groups}}
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
01
Adjust size
Sign in to open this model in the studio.
02
Preview
Adjusting and 3D preview are free.
03
Check export options
Confirm the files and available download options on the current page.
{{adjust_customize}}
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
{{instructions}}
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Manage model resources, user accounts and order records.
Only authorized administrators can access the platform admin console.
Preparing page
Preparing page
Guides
From choosing a model to printing and assembly, learn how each step works.
01
Choose and download
Check the size, part list and printing notes on the model page. If the size fits, click "Download full kit free" and sign in to get the ZIP package free.
02
Adjust size and layout
Click "Adjust size and layout" and sign in with Google to open this model in the studio. Enter length, width and height from your available space, then adjust dividers, levels or other parameters the model offers.
03
Check the model preview
Drag to rotate the model, and use zoom, exploded view and rulers to check structure and size. Adjusting parameters and previewing are free; click export to see the available download options. Custom files check your purchase or subscription when you export, and delivered results can be downloaded again from your account.
04
Slicing and assembly
Unzip the ZIP and import the STL files into your slicer in millimeters. Set orientation and supports from each part's printing notes, and make sure your build plate can hold it. After printing, remove supports and burrs and assemble with matching parts from the same version.
FAQ
How do I measure the size I need?
Measure the outer length, width and height the box may occupy, and leave room to take items in and out. Walls, floor and dividers take up interior space; when storing specific items, also measure the items and check the model's clearance notes. For multi-level models, enter the overall or per-level height as the option describes.
Do I need to set lid and drawer clearances myself?
Mating clearances are controlled by each model's structure rules; lids, drawers and bodies update together when you resize. Printers, filament and slicer settings affect the actual fit; test-print key mating parts first. Use the complete set of parts from the same download.
Does the exploded view change print sizes?
No. The exploded view is for viewing only; the spacing is not part of the part sizes. When collapsed, the rulers mark the overall size; when exploded, they mark each part's actual length, width and height.
What are STL and STEP for?
STL is for slicing and 3D printing; STEP is for further editing in compatible CAD software. The size list records each part's outer dimensions. Preview colors are for reference only; STL files carry no color.
What if a download fails or I need it again?
Default models can be downloaded again from the model page. If a file is temporarily unavailable, retry or refresh the model details; use the complete set of files from the same download.
How do I keep adjusted sizes?
Unexported parameters in the studio belong to the current page and may be lost if you refresh or close it. Note down the sizes and layout you want to keep; default files can be downloaded again from the model page.
What else should I check before printing?
Make sure part sizes, print orientation, supports and filament suit your printer. Check the hardware the model needs and the actual size of your items. Test-print lids, drawers, threads and connectors first; test supporting or stacking structures empty first, then check stability in use step by step.
Effective date: October 14, 2026 · Applies to boxesmodel.com
These terms set out the rights and responsibilities between you and boxesmodel regarding the website, 3D model files and parametric customization services. Please read before registering, downloading or purchasing; if you do not agree, do not register, download or purchase. For how personal information is handled, see the Privacy Policy.
1. Service provider and scope
boxesmodel is a 3D-printable box model platform operated by an individual business operator based in China. The official website is boxesmodel.com and the support email is support@boxesmodel.com. We provide digital model files, online size and structure adjustment and file export. We do not sell or ship printed items and do not offer printing services.
Default-size models are free to download after sign-in; parameter adjustment and preview are free. Custom exports are provided with a single model purchase or an active subscription; the specific model, adjustable parameters and deliverables are as shown on the model page and at purchase. Custom files check your purchase or subscription when you export, and delivered results can be downloaded again from your account.
2. Accounts and eligibility
Downloading and opening the studio require signing in with a Google account you are entitled to use. Your first sign-in creates an account on this site; keep your contact details accurate, protect your account, and do not transfer, rent or share your account or purchased entitlements. If you notice unauthorized access, contact support promptly.
You must be legally able to accept these terms and buy digital services. Use by minors should be decided and supervised by a guardian under applicable law; you may not purchase on your own if you do not meet these requirements. If you use the service on behalf of an organization, you must be authorized by it.
3. Model license and intellectual property
Intellectual property in the model files and related designs belongs to boxesmodel or the respective rights holders. Once you lawfully obtain model files, you receive a non-exclusive, non-transferable license: you may keep the files, adjust size and structure as needed, and make prints for personal use or to sell physical items you print yourself. This scope applies to free default files and lawfully obtained paid custom files.
You may not sell, sublicense, share or publicly distribute the original or modified digital model files, upload them to other model platforms or public file libraries, or offer them as digital asset packs. A purchase does not transfer model copyright or license the boxesmodel brand, website code or other owners' trademarks.
When selling printed items, you are responsible for their quality, safety, compliance and buyer information, and may not claim certification by boxesmodel or any other brand. A normal subscription expiry does not affect the license above for files lawfully obtained earlier; refunds, infringement and material license breaches are handled under these terms.
4. Prices, payment and subscriptions
Default models are free to download. A single model unlock is US$3.90; monthly subscription US$9.90, quarterly subscription (every 3 months)US$24.90, yearly subscription US$79.90, all in US dollars including tax. The model, amount and period are shown before purchase, and payment starts only after you confirm; banks or payment institutions may charge currency conversion fees under their own rules.
A single purchase unlocks one model for your current account, not one set of parameters or one download: you can adjust the model's size and structure without limit and export all STL and STEP parts for every configuration. Adjusting and exporting later versions of the same model requires no new purchase; other models require a separate purchase or a subscription. A subscription allows unlimited models and custom exports during the paid period.
Subscriptions renew automatically for the chosen period. You can open the Creem customer portal from "Subscription & billing" in your account to manage payment methods or cancel renewal; cancel before the next renewal. After cancelling you can use it until the paid period ends; new custom exports stop at expiry, and delivered results can still be downloaded again. Cancelling renewal does not trigger an automatic refund; refunds follow the policy below.
Creem acts as Merchant of Record and authorized reseller and handles purchases, taxes, payment receipts and refunds; boxesmodel is responsible for delivering the models and digital services and for technical support. Transactions are also subject to the Creem Buyer Terms; those terms prevail for transaction-related conflicts; statutory consumer rights are not affected. Payment records and invoices are available in your account and the Creem customer portal.
5. Digital file delivery and re-downloads
Files are delivered online through the website; nothing is shipped. Default model downloads ask for confirmation first; custom files become downloadable after payment is verified or a valid entitlement is confirmed. The model package contains STL, STEP, a size list and notes; the parts shown on each model page apply. Delivered custom results can be downloaded again from "Model files" in your account; a normal subscription expiry does not affect these results.
Payment notifications may take time to process; check the original order status first to avoid buying twice. If you paid but did not receive the entitlement, lost files or a download failed, contact support with your order number; we will verify and restore delivery or handle it under the refund policy. Please back up downloaded files yourself; one assembly should use the complete parts from the same version and the same set of sizes.
6. Refunds and consumer rights
Within 14 days of a single model purchase, you may request a refund if you have not downloaded any custom file under that purchase; free downloads of default models do not affect this condition. Within 14 days of your first subscription purchase, you may request a refund if you have not used custom exports. After downloading or using, a simple change of mind does not qualify for the refunds above.
For duplicate charges, non-delivery or files unavailable because of platform problems, we will verify and fix or refund. please contact support@boxesmodel.com, providing your payment email, order number and a description of the issue; do not send full card details or passwords. We check export and file transfer records; a completed server transfer does not mean the file was saved or printed on your device, so please mention any download problems.
Refunds are processed by Creem; timing depends on the payment method and financial institution. The download and export entitlements covered by the refund are withdrawn; after a refund you must stop using files obtained through that purchase; other independent valid entitlements are not affected.
The refund conditions above do not limit the consumer rights granted by applicable law, including lawful remedies such as repair or refund for digital content that does not conform or cannot be delivered. Consent regarding early delivery of digital content and the right of withdrawal follows the explicit notice at checkout and applicable rules; not every download automatically ends a statutory right of withdrawal. You can also seek transaction support from Creem under the Creem Buyer Terms.
7. Model specifications and printing responsibility
Model sizes are in millimeters; lengths, widths and heights in the part list are outer bounds; see this model's specifications for usable interior space. Preview colors, camera angles and the exploded view are for viewing only and do not change export sizes. You need software that can open ZIP, STL or STEP files, plus suitable slicing software and printing equipment.
Printers, filament, slicer settings and assembly affect the actual result. Before printing, check your build volume, orientation, supports and hardware needs; test-print key mating parts first and test supporting or stacking structures empty first. Without appropriate testing and certification, models and prints should not be considered suitable for food contact, medical, protective or other safety-critical uses. Specific uses and limits are as stated in each model's description. These notes do not relieve us of our obligations for the model matching its description, digital delivery and statutory quality.
8. Fair use and infringement
You may not use the service for illegal activity, infringe the rights of others, bypass payment or access controls, maliciously interfere with the service, or abuse resources through automation. "Unlimited" does not permit sharing accounts, reselling digital models in bulk or disrupting the service. Mentions of compatible items in model names do not imply authorization or endorsement by the related brands.
If you believe content on this site infringes your rights, send the page, the basis of your rights and your contact details to the support email. We will verify and take necessary measures, and let affected parties explain.
9. Service changes, suspension and termination
You may stop using the service and request account deletion under the Privacy Policy; cancel subscriptions you no longer need and back up your files first. We may restrict access because of security risks, illegal activity or material breach; except in emergencies or where notice is legally prohibited, we will explain the reason and offer a chance to contact us, appeal or correct the issue.
Maintenance, failures or third-party outages may cause temporary unavailability; we will reasonably handle failures and help restore service. If we permanently stop a paid service or cannot continue to honor purchased entitlements for reasons on our side, we will notify you in advance and offer an applicable refund or other lawful remedy for the unfulfilled part; purchased entitlements are not removed by unilateral changes to these terms.
10. Liability and dispute resolution
Both parties shall perform their obligations under applicable law and these terms. We do not guarantee that every parameter combination suits your printer or a specific purpose, but we will resolve file and delivery problems caused by the platform. These terms do not exclude liability that cannot be excluded by law, including statutory consumer protection and liability for intent or gross negligence.
In case of a dispute, please first describe the problem to support so we can verify and handle it; this does not prevent you from complaining to relevant authorities or asserting rights before a competent court as permitted by law. The governing law is determined by the relevant conflict-of-law rules; consumer protections in your location that cannot be excluded by contract still apply.
11. Changes to these terms
We may update these terms because of service or legal changes and will state the effective date here. Material changes to prices, licenses or purchased entitlements will be announced in advance on the website or by account email; new prices or licenses do not retroactively reduce rights already obtained. Future renewal price changes will be announced before renewal, and you may cancel renewal.
12. Contact and customer support
For questions about models, delivery, subscriptions, refunds, licensing or these terms, contact support@boxesmodel.com. We reply within 3 business days; for complex issues, we will explain the next steps.
Effective date: October 14, 2026 · Applies to boxesmodel.com
This policy explains how boxesmodel handles information when you use the website, Google sign-in, model customization and purchases. boxesmodel is operated by an individual business operator based in China. For privacy questions, contact support@boxesmodel.com. Model use and purchase rules are in the Terms of Service.
Information we collect and how we use it
To provide accounts, model generation and digital delivery, we process sign-in details, necessary session information, submitted model parameters, generation jobs and file records; when you purchase, we process the order number, product, amount, payment and subscription status, and delivery records. When you contact support, we process the email, description and attachments you provide to resolve the request.
The website and hosting services also process network, device and technical information in requests to deliver pages, troubleshoot errors and prevent fraud and unauthorized access. Do not submit sensitive information unrelated to your issue in model parameters or support attachments.
Google sign-in and accounts
When you sign in with Google, we verify the identity credential Google provides and store an account identifier, display name and email in this product to identify your account and maintain sign-in and access control. This website never collects Google passwords. Signing in does not grant admin rights or paid download entitlements.
Browser data
The website uses necessary session cookies to keep you signed in and protect account requests. Optional analytics choices are saved in the current browser; clearing site data may require signing in again or resetting cookies. Files already downloaded to your device are not affected.
Necessary sign-in sessions last up to 7 days and sign-in security cookies up to 5 minutes; signing out clears the related session cookies. Analytics choices stay in local storage until you change or clear them.
Unexported parameters in the studio belong to the current page and may be lost if you refresh or close it. Note down the sizes and layout you want to keep.
Site analytics
To understand how the site is used, we aggregate daily counts of public page visits, referral categories and model file download responses by default. Basic statistics use no analytics cookies, create no visitor identifiers, and do not store IP addresses, accounts, full referrer URLs, search terms or per-visitor records; the data stays on this site, is not sent to Google and is not used for advertising or cross-site tracking. Known crawlers and prefetch requests are excluded where possible. Basic statistics are not affected by the Google Analytics cookie choice below; a download response does not mean the file was saved successfully.
After you allow site analytics, we use Google Analytics to understand traffic, visitor sources, model views, download starts and studio usage. Declining or withdrawing does not affect sign-in, modeling or free downloads, and activity while declined is never sent later.
Analytics include cleaned public page addresses, referring site domains, campaign identifiers, model identifiers and versions, categories and action types; names, email addresses, Google account identifiers, sign-in credentials and full model parameters are not sent. Accounts, orders, checkout, the admin console and embedded previews are excluded from analytics.
Google Analytics also processes analytics cookie identifiers and technical information such as browser and device, and receives IP addresses through the network connection; its processing is governed by the Google Privacy Policy. We do not link analytics identifiers to account data on this site.
Cookie settings
Necessary cookies keep you signed in and protect account requests. Analytics cookies are enabled only after you allow them. You can allow, decline or withdraw analytics cookies here at any time; your choice is saved in the current browser.
Service providers and data sharing
We use Google for authentication and infrastructure providers such as Railway for website hosting and data storage; when site analytics are enabled and you allow them, Google Analytics processes the related statistics. Payments are handled by Creem as Merchant of Record; billing and payment details needed at checkout are collected by Creem and its payment providers. boxesmodel keeps the order and status records needed for fulfilment and does not store full card numbers or security codes. To speed up sign-in, when you are signed out and hover, focus or press a button that requires sign-in (such as sign in, download or adjust size), the browser loads Google's sign-in component in advance; when the sign-in window opens, Google may show a "Continue as" prompt; you are not signed in to this site until you confirm.
These providers process information only as needed for their services and follow their own privacy rules, including the Google Privacy Policy and Creem Privacy Policy. We do not sell your personal information; necessary information may be provided to fulfil orders, protect account security, respond to valid legal requests or handle rights disputes.
Providers' servers may be outside your country or region, so using the service may involve cross-border processing. We manage providers and necessary data protection measures as required; contact us to learn how your information is handled.
Retention, security and legal basis
We process account, model and order information to perform the service contract; process necessary technical records for security, fraud prevention and operations; keep necessary transaction records for legal obligations; optional analytics require your permission. The specific legal basis depends on the applicable data protection rules.
Information is kept only as long as needed to provide the service, preserve purchased entitlements and delivered files, handle after-sales disputes, protect security and meet legal obligations. Retention periods for each category are set according to these purposes; information that is no longer needed is deleted or de-identified. When an account is deleted, transaction and dispute records that must be kept by law may be retained with restricted use.
We protect information with measures such as access control and protected sign-in sessions, but no network or storage can be absolutely secure. Protect your Google account, sign out on shared devices, and do not disclose sign-in credentials to others.
Your choices and rights
You can manage analytics cookies on this page. Declining or withdrawing does not affect sign-in, modeling or downloads, nor processing lawfully carried out before withdrawal. Your choice applies only to the current browser; you may need to set it again after changing devices or clearing site data. Necessary cookies serve the account and security features you request; disabling them may make those features unavailable.
Under applicable rules, you may request access, correction, a copy or deletion of personal information, ask to restrict or object to processing, and complain to a competent authority. Contact us from your account email at support@boxesmodel.com; we may verify your identity, will reply within 3 business days and will handle the request within the applicable legal period. Deleting your account may affect access to online files and entitlements; we will explain the impact first; cancel a subscription from "Subscription & billing".
Minors and policy updates
The service is not directed at children who cannot lawfully use such services on their own. Guardians who find inappropriate collection of a minor's information can contact us. Material privacy changes will be announced on the website or by account email; optional processing that requires new permission will be asked for first.