Adjust size
Sign in to open this model in the studio.
Remove the lid, then lift the tray using its side finger notches. The lid handle is for opening only, not for carrying the mailbox.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
A red mailbox with a green lift-off lid and envelope relief; the upper accessory tray is separated from the card compartment below.
Suitable for
- For greeting cards that fit the slot, notes and small stationery.
- Mail slot clear width
- 164.00 mm
- Mail slot clear height
- 12.00 mm
- Tray cell clear length
- 91.50 mm
- Clear height below slot
- 175.40 mm
- Default solid volume
- About 741 cm³ (check in your slicer) Estimate print cost
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
| Parts | Outer size | File formats |
|---|---|---|
| Mailbox body | 210 × 125 × 220 mm | STL · STEP |
| Removable divided tray | 191.4 × 106.4 × 24.8 mm | STL · STEP |
| Locating lid with handle | 204 × 119 × 24 mm | STL · STEP |
The ZIP contains the complete STL and STEP files, a size list and notes. Version 0.1.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
- Overall length including base
- 190–240 mm
- Overall width including base
- 110–145 mm
- Total height including handle
- 210–275 mm
Interior layout
- Inner tray columns
- 1–3
- Inner tray usable depth
- 16–28 mm
Functional configuration
- Mail slot clear width
- 145–190 mm
- Mail slot clear height
- 8–16 mm
Construction details
- Tray and lid clearance per side
- 0.35–0.75 mm
- Wall and floor thickness
- 2.4–3.4 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
Preview
Adjusting and 3D preview are free.
Check export options
Confirm the files and available download options on the current page.
Adjust this model
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
- All custom parts are included in the print files; no hardware is required.
- Preview colors are illustrative; STL and STEP do not include filament assignments.
- Print box bodies with the base down. Lids have features on both sides and require support planning in the slicer; support-free printing is not claimed.
- Only completed digital checks may be reported as passed; slicing, physical fit and load capacity remain untested.
- Remove the lid, then lift the tray using its side finger notches. The lid handle is for opening only, not for carrying the mailbox.
- For indoor storage only, not a weatherproof or lockable postal box. Card width must be less than the slot clear width.
- The wide mail-slot header requires removable support. Also check bridging or support for the handle crossbar.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Related models
Browse similar ↗Keep exploring
- Category
- Desk organizers