Eight-Lobe Stackable Storage Box | Free 3D Print STL & STEP

Eight-Lobe Stackable Storage Box model preview, default size 170 × 112 × 64 mm, 2 parts

2 partsSTL + STEPMillimetersVersion 1.0.0

01 / SPECIFICATIONS

Specifications

See the default structure and usable space.

An eight-lobe outline continues through the lid and foot to align matching desktop boxes.

Suitable for

Craft supplies
Stack only the same model with matching dimensions, wall thickness and clearance; remove upper cases before opening.

With lid Stacking alignment Craft supplies Eight-lobe outline Adjustable dividers

Reference clear height under lid: 48.7 mm

Locating engagement depth: 3.0 mm

Lid Clearance per Side: 0.40 mm

Positions across: 2

Rectangular reference cell length: 80.8 mm

Rectangular reference cell width: 51.8 mm

Default solid volume: About 215 cm³ (check in your slicer) Estimate print cost

Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.

02 / MODEL FILES

Files and dimensions

The default download includes all matching parts.

Default model parts and outer dimensions
Parts	Outer size	File formats
Storage box body	170 × 112 × 58.2 mm	STL · STEP
Lift-off stacking lid	170 × 112 × 8.8 mm	STL · STEP

The ZIP contains the complete STL and STEP files, a size list and notes. Version 1.0.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.

03 / ADJUSTMENTS

Adjustable options

Make the same model fit your space.

Outer size

Overall outer length: 140–220 mm
Overall outer width: 90–150 mm
Total height including the lid: 52–90 mm

Interior layout

Number of cells across: 1–4
Number of cells lengthwise: 1–3

Construction details

Nominal wall thickness: 2.4–3.6 mm
Locating clearance per side: 0.3–0.6 mm

Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.

Adjust size

Preview

Adjusting and 3D preview are free.

Check export options

Confirm the files and available download options on the current page.

Adjust this model

Size and structure parameters update all matching parts of this model together.

04 / PRINT & ASSEMBLY

Printing and assembly

Check slicing and fit after downloading.

All required printed parts are included; no purchased hardware is required.
The lid has a loose locating fit. Remove any upper box, then lift the lid vertically. Do not carry the case by its lid.
Stack only the same model with matching length, width, wall thickness and clearance. Alignment is not locking; load capacity and tip resistance are untested.
Place the body bottom down. Check lid orientation and supports in the slicer; slicing and physical fit tests have not been performed.
For dry small items only. No sealing, anti-mixing or food-contact safety claim is made.
Locating clearance is 0.40 mm per side. Print a fit sample first, then adjust for your printer and material shrinkage.
Curved or chamfered outlines reduce edge-cell space. Check the actual profile; reference cell dimensions do not imply a fully usable rectangle at the corners.

Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.