Adjust size
Sign in to open this model in the studio.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
Three staggered groups of slanted fins and two mechanical bands create a bold look. Adjust to measured can dimensions; retention and can changes have not been physically validated.
- Nominal can body diameter
- 66.0 mm
- Sleeve bore diameter
- 68.0 mm
- Nominal retention interference per side
- 0.25 mm
- Height of each fin
- 39.2 mm
- Default solid volume
- About 160 cm³ (check in your slicer) Estimate print cost
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
| Parts | Outer size | File formats |
|---|---|---|
| Two-can sleeve with integral slanted fins | 82 × 81.5 × 218 mm | STL · STEP |
The ZIP contains the complete STL and STEP files, a size list and notes. Version 0.1.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
- Sleeve height
- 180–260 mm
Functional configuration
- Can body diameter
- 60–72 mm
- Can height
- 105–135 mm
Construction details
- Radial can clearance
- 0.5–1.5 mm
- Nominal radial retention interference
- 0.1–0.4 mm
- Sleeve wall thickness
- 2.4–4 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
Preview
Adjusting and 3D preview are free.
Check export options
Confirm the files and available download options on the current page.
Adjust this model
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
- One printed part: the slanted fins are integral to the sleeve and the upper and lower slots reach their respective openings.
- Adjust to the measured can dimensions and test-print a retention sample first. Grip, recovery, complete can changes and durability have not been physically tested.
- The fins are decorative. Grip, slip resistance, load performance, airtightness and insulation have not been validated.
- No additional hardware is required. Not intended for direct food contact.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Related models
Browse similar ↗Keep exploring
- Category
- Baskets & open bins