Kitchen, Tea & Coffee Organizers

• 1 × M3 fully threaded socket head screw (default M3×16 mm; after changing parameters choose the length from the current list; head diameter ≤ 5.5 / height ≤ 3 mm)
• 1 × M3 hex nut (5.5 across flats / 2.4 mm thick)
• 1 × M3 flat washer (inner 3.2 / outer 7 / 0.5 mm thick)
• 4 × 3.5 mm round-head wood screws (default 16 mm shank under the head is only an 18 mm solid wood example; head diameter ≤ 7 / height ≤ 3 mm; choose the length by actual board thickness and the current list)

See the model page for specifications and assembly steps; after resizing, follow the current assembly list.

• 4 × 625-2RS1 bearings (inner Ø5 / outer Ø16 / width 5 mm)
• 4 × DIN 912 M5×20 mm fully threaded hex socket screws (head Ø ≤ 8.5 / height ≤ 5 mm, P0.8)
• 4 × DIN 934 M5 hex nuts (8 across flats / 4 mm thick, P0.8)
• 1 × DIN 912 M3×12 mm fully threaded screw (head Ø ≤ 5.5 / height ≤ 3 mm, P0.5)
• 1 × DIN 934 M3 nut (5.5 across flats / 2.4 mm thick, P0.5)

See the model page for specifications and assembly steps; after resizing, follow the current assembly list.

• Buy 1 complete MARTOR No. 45 blade (part 45.60) separately (39 × 18.5 × 0.30 mm)
• 2 × DIN 912 M3×10 fully threaded socket head screws (head Ø5.5 × 3 mm)
• 2 × DIN 934 M3 nuts (AF5.5 × 2.4 mm)

See the model page for specifications and assembly steps; after resizing, follow the current assembly list.