Adjust size
Sign in to open this model in the studio.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
Load a soft tissue pack from above, thread the first tissue, then replace the locating-ring mantel. The front fireplace is a shallow backed recess that stays outside the tissue channel.
- Clear tissue loading length
- 216.80 mm
- Clear tissue loading width
- 124.80 mm
- Clear height below locating ring
- 111.00 mm
- Lid insertion depth
- 4 mm
- Default solid volume
- About 530 cm³ (check in your slicer) Estimate print cost
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
| Parts | Outer size | File formats |
|---|---|---|
| Fireplace body | 230 × 140 × 119 mm | STL · STEP |
| Mantel lid with tissue slot | 230 × 140 × 10 mm | STL · STEP |
The ZIP contains the complete STL and STEP files, a size list and notes. Version 0.1.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
- Overall length including mantel
- 200–280 mm
- Overall width including base
- 120–170 mm
- Overall height including lid
- 100–160 mm
Functional configuration
- Dispensing slot clear length
- 80–160 mm
- Dispensing slot clear width
- 12–26 mm
Construction details
- Wall and locating ring thickness
- 2.4–3.6 mm
- Lift-off lid clearance per side
- 0.25–0.55 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
Preview
Adjusting and 3D preview are free.
Check export options
Confirm the files and available download options on the current page.
Adjust this model
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
- 2 printed parts: 1 fireplace body and 1 mantel lid with tissue slot. No purchased parts are required.
- Lift the lid to load a soft tissue pack, then thread the first tissue through the slot. Insert the locating ring vertically; it is neither a snap-fit nor a seal.
- Choose a tissue pack using the current clear cavity dimensions. Remove the lid completely for loading; there are no dividers obstructing a full pack.
- Local colors are for preview only; manufacturing files are uncolored. Brickwork, arch and holly are real raised geometry.
- Check decorative overhangs and lid print orientation in your slicer.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Related models
Browse similar ↗Keep exploring
- Category
- Desk organizers