Adjust size
Sign in to open this model in the studio.
Shell diameter excludes relief. Use preview specifications for assembled outside dimensions. The curved cavity is narrower than its opening away from the rim.
Based on the original blue-and-cream bauble concept, with a flat base and fixed partitions for sorting. Lift the whole lid vertically.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
Based on the original blue-and-cream bauble concept, with a flat base and fixed partitions for sorting. Lift the whole lid vertically.
- Conservative clear diameter at floor
- 88.25 mm
- Divider setback below bowl rim
- 5.50 mm
- Lower bowl usable height
- 51.40 mm
- Internal compartment count
- 4
- Default solid volume
- About 231 cm³ (check in your slicer) Estimate print cost
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
| Parts | Outer size | File formats |
|---|---|---|
| Bauble lower bowl | 153.4 × 153.4 × 60 mm | STL · STEP |
| Bauble locating lid | 153.2 × 153.2 × 101.6 mm | STL · STEP |
The ZIP contains the complete STL and STEP files, a size list and notes. Version 0.1.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
- Shell diameter (excluding relief)
- 120–180 mm
Interior layout
- Internal compartment count
- Undivided / Two compartments / Four compartments
Construction details
- Sphere wall and divider thickness
- 2.4–3.6 mm
- Locating lid clearance per side
- 0.3–0.6 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
Preview
Adjusting and 3D preview are free.
Check export options
Confirm the files and available download options on the current page.
Adjust this model
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
- 2 printed parts: lower bowl and locating lid. Decorations are joined to their bodies; no purchased parts are needed.
- Lift and replace the lid vertically. Hold its rim rather than pulling the top decoration.
- Shell diameter excludes relief. Use preview specifications for assembled outside dimensions. The curved cavity is narrower than its opening away from the rim.
- Colors are preview-only; STL and STEP are uncolored. Not sliced or physically test-printed. Check sphere, relief and lid orientation and supports.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Related models
Browse similar ↗Keep exploring
- Category
- Desk organizers