Adjust size
Sign in to open this model in the studio.
01 / SPECIFICATIONS
Specifications
See the default structure and usable space.
Lift the bag cover from its base to refill soft-pack tissues. Twin arch handles, sculpted ribbon and holly retain the gift bag concept.
- Clear tissue cavity length
- 224.80 mm
- Clear tissue cavity width
- 139.80 mm
- Clear tissue cavity height
- 128.15 mm
- Base locating depth
- 4 mm
- Default solid volume
- About 470 cm³ (check in your slicer) Estimate print cost
Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.
02 / MODEL FILES
Files and dimensions
The default download includes all matching parts.
| Parts | Outer size | File formats |
|---|---|---|
| Gift bag locating base | 230 × 145 × 7 mm | STL · STEP |
| Gift bag tissue cover | 230 × 152.8 × 176.8 mm | STL · STEP |
The ZIP contains the complete STL and STEP files, a size list and notes. Version 0.1.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.
03 / ADJUSTMENTS
Adjustable options
Make the same model fit your space.
Outer size
- Bag body length
- 200–260 mm
- Bag body width (excluding bow)
- 125–165 mm
- Total height including handle
- 155–210 mm
Functional configuration
- Handle height above bag rim
- 35–55 mm
- Dispensing slot clear length
- 80–145 mm
- Dispensing slot clear width
- 14–28 mm
Construction details
- Box wall thickness
- 2.4–3.6 mm
- Base clearance per side
- 0.3–0.6 mm
Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.
Preview
Adjusting and 3D preview are free.
Check export options
Confirm the files and available download options on the current page.
Adjust this model
Size and structure parameters update all matching parts of this model together.
04 / PRINT & ASSEMBLY
Printing and assembly
Check slicing and fit after downloading.
- 2 printed parts: gift bag tissue cover and locating base. Decorations are integral to the cover; no purchased parts are needed.
- Support the cover at its lower rim, lift it, load soft-pack tissues and lower it onto the base. The base does not lock; decorative handles must not carry the assembled box.
- The undivided cavity leaves the tissue pack and dispensing path clear. Choose a pack by the current clear length, width and height.
- Preview colors are not stored in STL or STEP. Not sliced or physically test-printed. Check supports for handle and bow overhangs in your slicer.
Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.
Related models
Browse similar ↗Keep exploring
- Category
- Desk organizers