Curled Witch Boot Organizer | Free 3D Print STL & STEP

Curled Witch Boot Organizer model preview, default size 185 × 95 × 140 mm, 1 part

1 partSTL + STEPMillimetersVersion 1.0.1

01 / SPECIFICATIONS

Specifications

See the default structure and usable space.

The curled outline, rounded sole, muted-purple cuff and amber buckle form one solid, with no floating star pieces.

Boot shaft clear depth at center: 56.3 mm

Shaft compartment clear width at center: 59.4 mm; elliptical ends narrow inward

Usable shaft height: 112.2 mm

Default solid volume: About 531 cm³ (check in your slicer) Estimate print cost

Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.

02 / MODEL FILES

Files and dimensions

The default download includes all matching parts.

Default model parts and outer dimensions
Parts	Outer size	File formats
Curled-Toe Witch Boot Organizer	185 × 95 × 140 mm	STL · STEP

The ZIP contains the complete STL and STEP files, a size list and notes. Version 1.0.1 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.

03 / ADJUSTMENTS

Adjustable options

Make the same model fit your space.

Outer size

Outside length including curled toe: 160–220 mm
Maximum sole width: 85–115 mm
Overall shaft height: 125–175 mm

Interior layout

Side-by-side shaft compartments: 1–2

Construction details

Base wall and floor thickness: 3–4 mm

Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.

Adjust size

Preview

Adjusting and 3D preview are free.

Check export options

Confirm the files and available download options on the current page.

Adjust this model

Size and structure parameters update all matching parts of this model together.

04 / PRINT & ASSEMBLY

Printing and assembly

Check slicing and fit after downloading.

1 complete printed part: curled toe, sole, buckle frame and relief are integral with the boot, with no purchased parts.
The boot shaft holds long pens, and the small instep compartment holds paper clips; both areas have their own floor.
Side-by-side dividers apply only to the shaft; the curled toe is a closed decoration, not a hook or handle.
Preview colors are for display only; STL/STEP files are uncolored. Check supports beneath the curled toe and buckle frame in the slicer.
Software validation does not replace slicing, load testing or physical test prints.

Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.