Toothy Monster Desk Caddy | Free 3D Print STL & STEP

Toothy Monster Desk Caddy model preview, default size 180 × 130 × 155 mm, 1 part

1 partSTL + STEPMillimetersVersion 1.0.1

01 / SPECIFICATIONS

Specifications

See the default structure and usable space.

The muted-purple rounded body has ivory teeth and two eyestalks. Short feet join the body continuously, and the pupils are physically recessed.

Rear-slot clear depth at center: 43.8 mm

Front compartment clear width at center: 53.6 mm; curved ends narrow inward

Conservative front compartment height: 51.1 mm

Default solid volume: About 386 cm³ (check in your slicer) Estimate print cost

Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.

02 / MODEL FILES

Files and dimensions

The default download includes all matching parts.

Default model parts and outer dimensions
Parts	Outer size	File formats
Monster compartment desk caddy	180 × 130 × 155 mm	STL · STEP

The ZIP contains the complete STL and STEP files, a size list and notes. Version 1.0.1 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.

03 / ADJUSTMENTS

Adjustable options

Make the same model fit your space.

Outer size

Overall outer length: 155–215 mm
Overall outer width: 115–160 mm
Overall height including eyestalks: 135–195 mm

Interior layout

Front small-item compartments: 2–4
Rear deep-well proportion: 35–48 %

Construction details

Base wall and floor thickness: 3–4 mm

Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.

Adjust size

Preview

Adjusting and 3D preview are free.

Check export options

Confirm the files and available download options on the current page.

Adjust this model

Size and structure parameters update all matching parts of this model together.

04 / PRINT & ASSEMBLY

Printing and assembly

Check slicing and fit after downloading.

1 complete printed part: eyestalks, teeth, paws and compartments form one solid, with no purchased parts.
Store paper clips and small items in front, and pens at the rear; the rear-slot ratio and front compartment count change the actual dividers.
The compartment sides are curved; centerline clear dimensions do not mean a rectangular item can fill every corner.
Eyeballs, eyestalks, rounded teeth and paws have real volume; preview colors are not multicolor-printing regions.
STL/STEP files are uncolored; software checks do not replace slicing and test printing. Check supports beneath the eyestalks.

Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.