Preserves the original twelve pumpkin grooves, smile, lid leaf, curled vines and six handle leaves. Leaf roots and vines form continuous integral joints. Both custom pins are included as printable parts; no missing custom hardware is required.

Listed part dimensions are outer bounds; usable interior space is given in this model's specifications.

The ZIP contains the complete STL and STEP files, a size list and notes. Version 1.0.0 Use the complete set of files of the same version and size for matching parts. Preview colors are for reference only; STL files carry no color.

Ranges are set by this model's structure; each combination must pass the studio's structure checks; matching parts update with the parameters.

1. Five printable parts: pumpkin basket, carved-leaf lid, vine handle, and left and right pivot pins. Both custom pins are included in the download.
2. Overall width includes the outermost pivot pins; lid skirt, compartments and handle axis update with the selected dimensions.
3. Insert each pin from outside through the handle into the body's blind socket. Apply a small amount of material-compatible model glue only to the pin tip; keep glue off the handle bearing surfaces.
4. Extra material: a small amount of plastic model glue compatible with the selected PLA or PETG. Load capacity has not been validated; handle gently as a tabletop candy basket.
5. Fold the handle down before lifting the lid vertically. One to four compartments hold individually wrapped sweets and small gifts; not intended for direct food contact.
6. In the slicer, orient each pin with its end face on the build plate. Support the sculpted leaves, vines and handle according to their actual overhangs.
7. Cover and preview preserve the orange pumpkin, black handle, green vines and purple leaves; STL downloads contain no colors.

Import into your slicer in millimeters and check build volume, orientation and supports for each part. Test-print lids, drawers and connectors first, and print the full set once the fit is confirmed.